is now online.
Online registration open! Buy your ticket for conference and exhibition now!
New Press Release:
May 15, 2012: Organic and Printed Electronics Offers Solutions for Industrial and Consumer Systems
April 25, 2012: Focus on applications
Preliminary Speakers List
Plenary Session - June 20 & 21, 2012
DG Information Society & Media, European Commission, Belgium
Dr. Thomas Skordas, Head of Photonics Unit INFSO-G5
The European Horizon for Organic & Large Area Electronics
Flextech Alliance, United States
Partnering for Progress in Flexible, Printed Electronics
Giesecke & Devrient, Germany
Reliable Transactions - Security through Authenticity
Heliatek, Germany
Towards mass production of organic vacuum-deposited solar cells and modules
Heraeus Precious Metals GmbH & Co. KG, Germany
Dr. Stephan Kirchmeyer, OE-A Chairman
Organic and Printed Electronics: Status, Opportunities and Challenges
Industrial Technology Research Institute (ITRI), Taiwan
Dr. Janglin Chen, Vice President of ITRI and General Director of DTC
Recent Development in Flexible Displays
Institut fuer Angewandte Photophysik, Technische Universitaet Dresden, Fraunhofer-Institute for Photonic Microsystems, Germany
Recent Progress in Small Molecule Organic Devices
National Institute of Advanced Industrial Science & Technology, Japan
Horizontal and vertical approach to the printed electronics
PolyIC GmbH & Co.KG, Germany
Wolfgang Mildner, Managing Director Poly IC, LOPE-C Chairman, Member of the Board of OE-A
Welcome and introduction
Business Conference - June 19 & 20, 2012
Applications of ITO Replacement and Transparent Conductors
Heraeus Precious Metals GmbH & Co. KG, Germany
Dr. Wilfried Loevenich, Head of R&D (Conductive Polymers Division)
The new market for conductive polymers: Touch Screens
Nanoforge, United States
Copper and Copper-Nickel alloy nanowires for transparent conductive film applications
PolyIC GmbH & Co. KG, Germany
Dr. Wolfgang Clemens, Head of Applications
Touch solutions based on flexible and R2R produced metal mesh sensors
Display Products and their use of Printed Electronics
Lighting
Philips Technologie GmbH, Germany
Dr. Dietrich Bertram, General Manager
Next steps towards functional OLED lighting
Plextronics, Inc., United States
Andrew Hannah, President and CEO
Driving Commercialization of OLED Lighting
Packaging & Promotion
Johnson & Johnson, Belgium
Eric Snoeckx, Director Open Innovation and Networking
The integration of printed electronics in the pharmaceutical industry
Thin Film Electronics ASA, Norway
Torgrim Takle, CFO and Chief Strategist
Commercialization of Printed Memories and Integrated Systems
Products and Markets
Eloy Consulting, France
Jean-Christophe Eloy, President and CEO, Yole Développement
Printed Electronics: Reality vs. Hype
BC-Investor Forum – June 19, 2012
B-Round
LIM Liquids in Motion GmbH, Germany
Dr Juergen Rawert, Managing Director
Droplet Driven Displays - Bistable Lowest-Power Displays
Ynvisible, Portugal
Jani-Mikael Kuusisto, Chief Business Development Officer
Things Alive - Ynvisible develops and markets interactive solutions for everyday printed items.
Seed Financing
Adiro Systems, India
Ravi Chivukula, Founder and Managing Director
Product Tracking with Printed Organic Tags
ISORG, France
Laurent Jamet, Co-founder, Business Development Director
Printed photodetectors and image sensors, a ready-to-fly technology
Imprint Energy, Inc., United States
Brooks Kincaid, Co-founder and Head of Business
Printed ultrathin, flexible, high capacity, rechargeable batteries for portable electronics and emerging flexible and thin integrated products
Technical Conference – June 20 & 21, 2012
Displays I
MpicoSys - Embedded Pico Systems, Poland
Dr Peter Slikkerveer, Director Innovations
The Technical Challenges of Display Cards and Display Labels
Displays II
Polymer Vision B.V., Netherlands
Dr. Erik van Veenendaal, Principal Scientist
Progress towards truly rollable OLED displays
Plastic Logic GmbH, Germany
Dr Octavio Trovarelli, Lead Process Integrator
Development and high-volume production of large-area, OTFT-driven, shatterproof and lightweight displays
Electronics / Components I
Research Center for Organic Electronics (ROEL), Yamagata University, Japan
Prof. Shizuo Tokito, Distinguished Research Professor
Flexible Electronics based on Organic Transistors (OTFTs)
Stora Enso Oyj, Finland
Simo Siitonen, Research Engineer
On a way to fully printed Integrated Smart Systems
Sunchon National University, South Korea
Prof. Gyoujin Cho, Director of the research consortium for developing all R2R printed RFID tags
Fully gravure printed 96 bit 13.56 MHz RFID tags
Electronics / Components II
Cavendish Laboratory, University of Cambridge, United Kingdom
Prof. Dr Henning Sirringhaus, Hitachi Professor of Electron Device Physics
High performance, solution-processed organic transistor circuits
Imprint Energy, United States
Dr. Christine Ho, Co-Founder and Head of Technology
Thin, Flexible, Rechargeable Zinc Batteries Incorporating a High Conductivity Polymer Electrolyte
PARC Palo Alto Research Center, United States
Dr. Tse Nga (Tina) Ng, Member of Research Staff II
Scalable logic-addressed memory: printing integration of organic complementary logic and ferroelectric memory
Integrated Smart Systems I
Holst Centre / TNO, Netherlands
Dr Marc Koetse, Project leader, Smart Packaging group
Smart Systems, integration of classic and plastic electronics on a system level
MC10, Inc., United States
Dr Conor Rafferty, Director of Technology Development
Conformal Electronics for Health and Fitness
Integrated Smart Systems II
Thinfilm, Norway
Jakob Nilsson, Leader of Print Process and Development
Thinfilm memories and first steps towards integrated memory and system products
Lighting I
Korea Advanced Institute of Science and Technology (KAIST), South Korea
Prof. Seunghyup Yoo, Associate Professor
Enhancing outcoupling efficiency of OLEDs: opportunities from conductive low-index layers
Novaled AG, Germany
Dr Domagoj Pavicic, Customer Project Manager / Senior Scientist
White PIN OLEDs with enhanced outcoupling efficiency by crystallizing organic layers
Saint-Gobain Recherche, France
Dr. Fabien Lienhart, OLED substrate project leader
Substrates for OLED lighting enabling high efficacy commercial device
Lighting II
Cambridge Display Technology Ltd, United Kingdom
Dr Ilesh Bidd, Vice President, Research & Intellectual Property
Solution Processable Polymer OLED Lighting
Materials I
Imperial College, United Kingdom
Prof. Iain McCulloch, Professor of Polymer Materials in the Department of Chemistry
Design of high performance semiconducting polymers for organic electronics
Polyera, United States
Materials Development for Organic Transistors and Solar Cells
Materials II
Cambrios Technologies Corporation, United States
Dr Rahul Gupta, Sr. Director Business Development
Cambrios ClearOhm™ Solution Coated and Printed Transparent Electrode for OLED’s and OPV’s
Solvay S.A., Belgium
Dr. Vincent Thulliez, Organic Electronics Technical Marketing Manager
Materials development for organic and printed electronics
Tera-Barrier Films Pte Ltd, Singapore
Dr Senthil Ramadas, Chief Technology Officer
Nanoparticulate Barrier Films for Plastic Electronics Applications
OPV I
Konarka Technologies Inc., United States
Dr. James Buntaine, Executive Vice President & Chief Technology Officer
Organic PV Enables the Fourth Phase of PV: "Architectural Power”
Solar Press Ltd., United Kingdom
Dr. Jonathan Halls, Chief Technology Officer
--- detailed information coming soon ---
Solarmer Energy, Inc., United States
Dr. Yue Wu, Vice President of Technology Development
Development of Cost-Effective R2R OPV Manufacturing Process
OPV II
Eight19, United Kingdom
Development of Organic Photovoltaic Modules for off-grid markets
Process I
AIXTRON SE, Germany
Juergen Kreis, Director Business Development
Carrier-gas enhanced vapor-phase deposition: disruptive approach or complementary production technology for advanced organic electronic devices
Coatema Coating Machinery GmbH, Germany
Thomas Kolbusch, Vice President
Printing, coating and hot embossing equipment and processes for large area printed electronics
FUJIFILM Dimatix, Inc., United States
Martin Schoeppler, CEO and President
How Can Digital Materials Deposition with Inkjet Enable Printed Electronics?
Process II
Cambridge Display Technology Ltd, United Kingdom
Dr. Graham Anderson, Senior Scientist; Device Physicist - Ink Jet Printing
RGB Ink Jet Printed Soft Cavity OLED performance
KROENERT GmbH & Co KG, Germany
Frank Schaefer, Sales Director New Products
Recent technical developments in regards to coating and printing of Large Area Electronic materials in R2R production
Scientific Conference – June 20 & 21, 2012
Inorganic Materials and Nanomaterials
Liquid X Printed Metals Inc. , United States
Dr David Fyfe, Executive Vice-President
Deposition by Printing of Metals with Enhanced Properties
Institute of Educational Sciences/Selcuk University, Turkey
Gradient and Homogenous CdTeSe Alloys as Inks for Device Fabrication
DuPont (UK) Ltd, United Kingdom
Vince Arancio, Senior Technical Specialist
Demonstration of an Improved Stretchable and Thermoformable Silver Paste for Capacitive Switch and Flexible Functional Electronics
The Hebrew University of Jerusalem, Israel
Copper Ink-Jet inks for Flexible and Plastic Electronics
OLEDs
Holst Centre / TNO, Netherlands
Technologies and materials for electrodes in large area OLEDs
ENEA , Italy
Electro-optical study of a white OLED device based on carbazole/oxadiazole POC copolymer
Fraunhofer Institut für Photonische Mikrosysteme, Germany
Transparent OLEDs for signage and decorative lighting applications
Friedrich-Schiller-University Jena, Germany
Dr Jolke Perelaer, Postdoc / Project manager
Inkjet Printing of Conducting Polymers for OLED Applications
OPV
SPECIFIC, Swansea University, United Kingdom
Rapid processing technologies for dye-sensitized solar cells
Fraunhofer IAP, Germany
Using Inkjet Printing to Deposit Solar Cell Functional Layers
Nano and Advanced Materials Institute Limited, China
Dr Peter W. Lee, Chief Technology Officer
Printable transparent conductive films and its application in organic solar cell
Holst Centre, Netherlands
Dr Ronn Andriessen, Program Manager Organic PhotoVoltaics
Towards Low Cost, Efficient and Stable Organic Photovoltaic Modules
Organic Materials
Merck Chemicals Ltd, United Kingdom
High Efficiency Donor and Acceptor Materials for OPV Commercialisation
FhG-IAP, Germany
Design of absorber polymers for environmentally friendly and energy saving inkjet printed organic solar cells
Merck Chemicals Ltd, United Kingdom
Dr Giles Lloyd, Senor Manager, OE/OPV Marketing and Sales
Organic Semiconductor Materials - Ready for Mass Production!
Nano-C, Inc., United States
Fullerenic Materials and their Use in Organic Electronics
Printed Sensors and Functional Devices
University of California, Berkeley, United States
Development and characterization of an air-stable printed silver-zinc battery
National Chung Cheng University, Taiwan
A Novel liquid iris based on electrowetting technology
CeNTI, Portugal
Photo-Cured Electrolytes for Low-Cost, Printable and Flexible Electrochromic Devices
YDreams/FCT-UNL, Portugal
Inkjet printing of electrochromic materials on plastic and paper-based electrodes for electrochromic devices
Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland
Francisco Molina-Lopez, PhD student
Printed temperature and humidity sensors on paper
Printing and Patterning I
Fraunhofer ILT, Germany
Comparison of laser ablation of transparent conductive materials on flexible and rigid substrates
Karlsruhe Institute of Technology, Germany
Dr. Alexander Colsmann, Head of Organic Photovoltaics Group
Solution Processed and Laser Structured Silver Electrodes for Organic Solar Cells
VTT Technical Research Centre of Finland, Finland
Conductor grids for large-area optoelectronic devices; evaluation of printing technologies and performance comparison
Ceradrop, France
Towards a workflow and tools dedicated to inkjet for printed electronics
Printing and Patterning II
Fontys University of Applied Sciences, Netherlands
Martijn van Dongen, Researcher
µPlasma printing of hydrophobic and hydrophilic patterns to improve wetting behaviour for printed electronics
Loughborough University, United Kingdom
Yan Zhang, PhD Research Student
Factors influencing the size evolution of inkjet-etched micro-via-holes in thin polymer layers
TU Eindhoven, Netherlands
Prof. Dr Anton Darhuber, Professor
Active control of evaporative solution deposition by modulated infrared illumination
KAIST, South Korea
The effects of the nano structured surface on printed electronics
RFID and Antenna Structures
Tampere University of Technology, Finland
Organic diodes for RF energy harvesting
Fraunhofer ENAS, Germany
Research on Screen Printed Copper UHF RFID Transponder Antennas for Book Tagging
Ecole Nationale Supérieure des Mines de St-Etienne, Centre Microélectronique de Provence, France
High efficiency of Low-cost Spiral Antennas for RFID, Fully Printed by an Inline Inkjet Process
CNRS - AIX MARSEILLE UNIVERSITY, France
Laser printing of silver nanoparticle inks
Roll to Roll Processes
adphos Digital Printing GmbH, Germany
Improve Productivity and Product Quality with NIR-Drying and Heating Technology
VTT Technical Research Centre of Finlan, Finland
Gravure-printed sol-gel derived hybrid aluminium oxide dielectric films fabricated for TFT applications
Toba Co., Ltd. , South Korea
Dr Soonoh Kwon, Senior researcher
Fine Pattern Printing by Ink Transfer Mechanism in R2R Gravure System
Holst Centre, Netherlands
Eric Rubingh, Researcher Printing Technologies
Embedding of printed high conductive electrode grids for OLED and OPV devices
University of California, Berkeley, United States
Rungrot Kitsomboonloha, Gard Researcher
A Simple Model of Highly Scaled Gravure Printing
Sintering and Phase Conversion
Dr. Hoenle AG, Germany
Petra Burger, Process Development engineer
UV and LED curing process for printed electronics
The Hebrew University of Jerusalem, Israel
Fabrication of Conductive and Transparent Electrodes at Room Temperature by Self Assembly of Silver Nanoparticles
Tampere University of Technology, Finland
Comparison of photonic sintering of two inkjet-printed nanoparticle silver inks
Fraunhofer IFAM, Germany
Christian Werner, Project Manager
Sintering of printed nanoparticulate constantan structures
Substrates and Barriers
Fraunhofer IPMS , Germany
Roll-to-Roll encapsulation and defect characterization of flexible OLED devices
National Physical Laboratory, United Kingdom
Traceable measurement of water vapour transmission rate using cavity ring down spectroscopy
DuPont Teijin Films, United Kingdom
Dr William MacDonald, Business Research Associate
Designing Films for Flexible Electronics and O-PV
Beneq, Finland
Dr Mikko Söderlund, Application Manager
Roll-to-roll atomic layer deposition technology for producing single layer ultra barriers
Mid Sweden University, Sweden
Effect of Paper Properties on Electrical Conductivity and Pattern Definition for Silver Nanoparticle Inkjet Ink
Thin Film Transistors
Double-Shot Inkjet Printing for Single-Crystal Semiconductor Films
cea, France
Amorphous and small molecule fully printed organic CMOS technologies for large area circuit electronics
ACREO, Sweden
Dr Peter Andersson Ersman, Research Scientist
Displays and Transistors Printed on Flexible Substrates and Integrated into Versatile Applications
TU Chemnitz, Germany
Fully mass printed organic field effect transistors with a transit frequency in the kHz range
Interactive Session – June 20, 2012
Device and Circuitry Design, Simultations
Universitat Autonoma de Barcelona, Spain
Prof. Dr Jordi Carrabina, Director
Improving Circuit Performance by using Cell-Libraries for Application Specific Printed Electronic Circuits
Universidade de Aveiro, Portugal
The effect of individual active area cell on the final prototype of an organic bulk-heterojunction photovoltaic
University of Oulu, Finland
The effect of layer thickness on antenna performance of inkjet printed UHF RFID antennas
Universitat Autonoma de Barcelona, Spain
Carme Martinez-Domingo, R&D Engineer
Inkjet Geometric Design Rules Generation and Characterization
Mannheim University of Applied Science, Germany
Modelling and Simulation of Organic Thin Film Transistor Circuits
Fluxim AG, Switzerland
Advanced Characterization of Organic Solar Cells for Model-Based Parameter Extraction
Devices
CEA LITEN, France
Development of organic passive devices and sensors on flexible substrate
Université Montpellier 2, France
Screen-printed pyroelectric and piezoelectric polymeric thick films on paper substrate
ENEA Portici Research Centre, Italy
Dr Maria Grazia Maglione, Researcher
A systematic ageing study of encapsulated OLEDs on glass substrates
eni S.p.A., Italy
Inorganic HfOx/AlOx barrier films deposited by ALD, for enhancing the stability of Organic Solar Cells.
National Electronics and Computer Technology Center, Thailand
Dr Adisorn Tuantranont, Researcher
Inkjet-printed graphene-PEDOT:PSS modified on screen printed carbon electrode for biochemical sensing
Sungkyunkwan University, South Korea
Electrospray Process for Small Molecule Organic Light Emitting Layers
SKKU, South Korea
Graphene-silver nanowire hybrid thin films for flexible transparent electrodes using electrospray processes
Ecole Polytechnique Fédérale de Lausanne, Switzerland
Andrés Vásquez Quintero, PhD researcher
Foil-to-foil electrical interconnection of printed capacitive sensors using through foil vias and anisotropic conductive adhesive technologies
KTH (Royal Institute of Technology), Sweden
Fabrication and performance evaluation of ultralow-cost inkjet-printed chipless RFID tags
Instytut Technologii Elektronowej, Poland
Carbon – polymer printed resistors, their properties and areas of application .
CeNTI, Portugal
White and near-white OLEDs for efficient home consumer lighting
POSTECH, South Korea
Preparation of Flex Lami-capsulation for Flexible Organic Light Emitting Diodes
Daimler AG, Germany
Influence of humidity exposure and mechanical ageing in electrochromic devices
bangor university, United Kingdom
Lifetime studies on solar cells fabricated with PCPDTBT synthesized by Pd-catalysed direct arylation polymerisation
Materials
MicroChem Corp., United States
G-Line Photosensitive SU-8 Formulation for Organic Electronics
Chemetall GmbH, Germany
Dr Jens Carsten Röder, Global Marketing Manager
Toolbox for Semiconductor Synthesis
Karlsruhe Institute of Technology, Germany
New Coppertunities: Auto-catalyzed crosslinking and modification of copper-emitters for OLEDs
University of Oulu, Finland
Tuomas Happonen, PhD student, researcher
Reliability study on printed traces on flexible substrate under bending stress
cynora GmbH, Germany
Novel polynuclear copper complexes featuring interesting luminescent characteristics
Brno University of Technology, Czech Republic
Prof. Martin Weiter, Head of reserach
Soluble Diketo-pyrrolo-pyrroles for Organic Electronics and Photonics
SELCUK UNIVERSITY, Turkey
Donor–Bridge–Acceptor Alternating Conjugated Copolymers Based on Perylenediimide and thiophene
Selcuk University, Turkey
SURFACE MODİFİCATİON and CHARACTERİZATİON of INDIUM TIN OXIDE ELECTRODES with SALEN COMPLEXES
ENEA, Italy
Correlation between morphology and photovoltaic performance of P3HT:PCBM blend film deposited by inkjet printing
I.I.T. Kanpur, India
Prof. Dr Y N Mohapatra, Professor
Time Analyzed Transient Spectroscopy to monitor carrier dynamics at deep Level defects in polymeric semiconductors
Oxford Advanced Surfaces Group PLC, United Kingdom
Dr Jon-Paul Griffiths, Group Manager
The Importance of Interlayer Engineering in the Manufacture of Next Generation Materials and Devices
University of West Bohemia, Czech Republic
Contact properties of PEDOT based metal-organic heterojunctions
Selcuk University, Turkey
Modification of indium tin oxide (ITO) surfaces with polyelectrolytes for biofilm formation
cynora GmbH, Germany
Novel highly luminescent, mononuclear copper complexes for OLED applications
SELCUK UNIVERSITY, Turkey
Solution Processable Magnetic Manoparticles for Inkjet Printed Devices
Fraunhofer-Institut für Verfahrenstechnik und Verpackung IVV, Germany
Theoretical Studies on the Barrier Properties of Multilayer Films for the Encapsulation of Organic Electronic Devices: Stationary Permeation and Time Lag
Printing, Patterning Technologies and Appropriate Equipment
Technical University of Darmstadt, Germany
Alexandra Lyashenko, Research Assistent
Contacting methods for functional printing
Seoul National University, South Korea
Spreading and drying mechanism for inkjet printing of high-resolution patterns embedded in flexible substrates
Swansea University, United Kingdom
Dr Eifion Jewell, Senior Technology Transfer Fellow
Developments in paper based electroluminescent lamps.
CEA-Liten, France
jean-yves laurent, project manager
From lab to pilot line for Organic Photo Detectors on flex
Technische Universität Darmstadt, Germany
Solvent compatibility of flexographic printing forms in printed electronic
Konkuk University , South Korea
Investigation of NIP Roller on Ink Transfer in R2R Gravure Printing System
Technische Universität Darmstadt, Germany
Stability and reproducibility of droplet formation in inkjet printing
Technische Universität Darmstadt, Germany
Electrical noise of printed OFETs and layer morphology
Sungkyunkwan university, South Korea
Fabrication of flexible OLED lighting using metal-grid substrate and thin film encapsulation
SungKyunKwan University, South Korea
Moisture-barrier property of nanolaminate-multilayer structures for thin-film encapsulation of flexible OLED lightings
Fraunhofer EMFT, Germany
Waqas Mumtaz Syed, Research Engineer
Solution processed roll to roll OTFTs fabrication with carbon screen-printed electrodes
Leitat Technological Center, Spain
Dr Mónica Della Pirriera, Researcher
Eu photolumiscence paste for PV
selcuk university, Turkey
Nanopatterning of Colloidal Nanocrystals by Using Block Copolymers
Sungkyunkwan Univ., South Korea
Polymer/Silver Nanowires Thin Films for Flexible Transparent Electrodes using Electrospray Deposition Process
Osaka University, Japan
Ink-receiving layers on polyimide films for narrow and high conductive inkjet-printed lines
Friedrich-Schiller-University Jena, Germany
Sebastian Wünscher, Ph.D. student
Inkjet printing and low temperature sintering of metal nanoparticles
VTT Technical Research Centre of Finland, Finland
Mari Ylikunnari, Research Scientist
Roll-to-roll pilot patterning of electrodes
Technische Universität Darmstadt, Germany
Gravure and Flexo Printing under controlled Atmosphere – Machines and Processes
Swansea University, United Kingdom
Dr David Beynon, Research Assistant
Volume R2R Production of Conductivity Enhancing Features for Photonics Applications
Swansea University, United Kingdom
Roll-to-roll flexographic printing of highly accurate conductive micro-scale networks
CEA INES, France
Dr Solenn BERSON, R&D Scientist
Development of an inkjet printing process for the elaboration of OPV modules
Pohang University of Science and Technology, South Korea
Large-area light-emitting organic nanowire printing
Products
University of Ljubljana, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia , Slovenia
Printed HF and UHF RFID Antenna Directly on Cardboard and Recycled Paper
Schneider Electric, France
Dr Cecile VENET, Printed Electronic Program Leader
In-mold labeling of printed electronic electrophoretic display
Fraunhofer FEP, Germany
Dr John Fahlteich, Project Manager
Roll-to-Roll Technology on Pilot Scale for Transparent Ultra-High Multilayer Barriers
University of Applied Sciences Munich , Germany
Prof. Dr Ulrich Moosheimer, Professor for Printing Technologies
Printed Electronics for Interactive Elements in Books
Quality Control in Production Lines
Konkuk University, South Korea
A novel method to decide operating tension in R2R slot-die coating system
Jeonju Univ., South Korea
R2R Matching Technology in Preparing a Transparent Conducting Film using CNT
Technical University of Chemnitz, Germany
Dr Hyunkyoo Kang, Postdoctoral fellow
Register modeling for multi-layer hybrid roll-to-roll printing systems
Dr. Schenk GmbH Industriemesstechnik, Germany
Hans Oerley, Senior Business Development Manager
Metrology systems for optical in-line process control in the production of OLED and OPV roll-to-roll production (R2R)
Konkuk University, South Korea
A Study on the Non-contact Transporting Web Accumulator
Hanyang university, South Korea
A Study on Sintering Process of TiO2 Layer using Infrared Heat Treatment
Technische Universität Darmstadt, Germany
Impedance Spectroscopy as a Tool for the Detection of Mixed Layers in Solution Processed Semiconductors
Short Courses
(90 minutes per presentation)
Devices
The fundamentals of organic semiconductor based devices
Dr. Thomas Anthopoulos, Imperial College, United Kingdom
Reader in Experimental Physics in the Department of Physics and The Centre for Plastic Electronics
Materials
Materials for Organic/Printed Electronics and Photonics
Dr. Antonio Facchetti, Polyera, United States
CTO
Process
Printing and patterning
Dr. Andreas Willert, Department Printed Functionalites, Fraunhofer ENAS Chemnitz, Germany
Senior Scientist
Sensors
Short Course on Sensors
Prof. Tony Killard, Uni West England, United Kingdom
Professor of Biomedical Sciences, Centre for Research in Biosciences
