Conference Speakers List 2012
Scientific Conference – June 20 & 21, 2012
Inorganic Materials and Nanomaterials
Liquid X Printed Metals Inc. , USA
Dr David Fyfe, Executive Vice-President
“Deposition by Printing of Metals with Enhanced Properties”
DuPont (UK) Ltd, UK
Vince Arancio, Senior Technical Specialist
“Demonstration of an Improved Stretchable and Thermoformable Silver Paste for Capacitive Switch and Flexible Functional Electronics”
Institute of Educational Sciences/Selcuk University, Turkey
“Gradient and Homogenous CdTeSe Alloys as Inks for Device Fabrication”
The Hebrew University of Jerusalem, Israel
“Copper Ink-Jet inks for Flexible and Plastic Electronics”
OLEDs
Fraunhofer Institut für Photonische Mikrosysteme, Germany
“Transparent OLEDs for signage and decorative lighting applications”
Holst Centre / TNO, Netherlands
“Technologies and materials for electrodes in large area OLEDs”
Friedrich-Schiller-University Jena, Germany
Dr Jolke Perelaer, Postdoc / Project manager
“Inkjet Printing of Conducting Polymers for OLED Applications”
ENEA , Italy
“Electro-optical study of a white OLED device based on carbazole/oxadiazole POC copolymer ”
OPV
Holst Centre, Netherlands
Dr Ronn Andriessen, Program Manager Organic PhotoVoltaics
“Towards Low Cost, Efficient and Stable Organic Photovoltaic Modules”
Nano and Advanced Materials Institute Limited, China
Mr. Jifan Li, Chief Technology Officer
“Printable transparent conductive films and its application in organic solar cell”
SPECIFIC, Swansea University, UK
“Rapid processing technologies for dye-sensitized solar cells”
Fraunhofer IAP, Germany
“Using Inkjet Printing to Deposit Solar Cell Functional Layers”
Organic Materials
Merck Chemicals Ltd, UK
“High Efficiency Donor and Acceptor Materials for OPV Commercialisation”
Merck Chemicals Ltd, UK
Dr Giles Lloyd, Senor Manager, OE/OPV Marketing and Sales
“Organic Thin Film Transistor Materials - Ready for Mass Production!”
FhG-IAP, Germany
“Design of absorber polymers for environmentally friendly and energy saving inkjet printed organic solar cells”
Printed Sensors and Functional Devices
University of California, Berkeley, USA
“Development and characterization of an air-stable printed silver-zinc battery ”
CeNTI, Portugal
“Photo-Cured Electrolytes for Low-Cost, Printable and Flexible Electrochromic Devices”
YDreams/FCT-UNL, Portugal
“Inkjet printing of electrochromic materials on plastic and paper-based electrodes for electrochromic devices”
Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland
Francisco Molina-Lopez, PhD student
“Printed temperature and humidity sensors on paper”
National Chung Cheng University, Taiwan
“A Novel liquid iris based on electrowetting technology”
Printing and Patterning I
Ceradrop, France
“Towards a workflow and tools dedicated to inkjet for printed electronics”
Fraunhofer ILT, Germany
“Comparison of laser ablation of transparent conductive materials on flexible and rigid substrates”
VTT Technical Research Centre of Finland, Finland
“Conductor grids for large-area optoelectronic devices; evaluation of printing technologies and performance comparison”
Karlsruhe Institute of Technology, Germany
Dr. Alexander Colsmann, Head of Organic Photovoltaics Group
“Solution Processed and Laser Structured Silver Electrodes for Organic Solar Cells”
Printing and Patterning II
TU Eindhoven, Netherlands
Prof. Dr Anton Darhuber, Professor
“Active control of evaporative solution deposition by modulated infrared illumination”
KAIST, Korea, South
“The effects of the nano structured surface on printed electronics”
Loughborough University, UK
Yan Zhang, PhD Research Student
“Factors influencing the size evolution of inkjet-etched micro-via-holes in thin polymer layers”
Fontys University of Applied Sciences, Netherlands
“µPlasma printing of hydrophobic and hydrophilic patterns to improve wetting behaviour for printed electronics”
RFID and Antenna Structures
Fraunhofer ENAS, Germany
“Research on Screen Printed Copper UHF RFID Transponder Antennas for Book Tagging”
Tampere University of Technology, Finland
“Organic diodes for RF energy harvesting ”
Ecole Nationale Supérieure des Mines de St-Etienne, Centre Microélectronique de Provence, France
“High efficiency of Low-cost Spiral Antennas for RFID, Fully Printed by an Inline Inkjet Process”
CNRS - AIX MARSEILLE UNIVERSITY, France
“Laser printing of silver nanoparticle inks”
Roll to Roll Processes
Holst Centre, Netherlands
Eric Rubingh, Researcher Printing Technologies
“Embedding of printed high conductive electrode grids for OLED and OPV devices”
VTT Technical Research Centre of Finlan, Finland
“Gravure-printed sol-gel derived hybrid aluminium oxide dielectric films fabricated for TFT applications”
Toba Co., Ltd. , Korea, South
Dr Soonoh Kwon, Senior researcher
“Fine Pattern Printing by Ink Transfer Mechanism in R2R Gravure System”
University of California, Berkeley, USA
Rungrot Kitsomboonloha, Gard Researcher
“A Simple Model of Highly Scaled Gravure Printing”
adphos Digital Printing GmbH, Germany
“Improve Productivity and Product Quality with NIR-Drying and Heating Technology”
Sintering and Phase Conversion
Tampere University of Technology, Finland
“Comparison of photonic sintering of two inkjet-printed nanoparticle silver inks”
Fraunhofer IFAM, Germany
Christian Werner, Project Manager
“Sintering of printed nanoparticulate constantan structures”
The Hebrew University of Jerusalem, Israel
“Fabrication of Conductive and Transparent Electrodes at Room Temperature by Self Assembly of Silver Nanoparticles”
Dr. Hoenle AG, Germany
Petra Burger, Process Development engineer
“UV and LED curing process for printed electronics”
Substrates and Barriers
Beneq, Finland
Dr Mikko Söderlund, Application Manager
“Roll-to-roll atomic layer deposition technology for producing single layer ultra barriers”
National Physical Laboratory, UK
“Traceable measurement of water vapour transmission rate using cavity ring down spectroscopy”
Mid Sweden University, Sweden
“Effect of Paper Properties on Electrical Conductivity and Pattern Definition for Silver Nanoparticle Inkjet Ink”
Fraunhofer IPMS , Germany
“Roll-to-Roll encapsulation and defect characterization of flexible OLED devices”
DuPont Teijin Films, UK
Dr William MacDonald, Business Research Associate
“Designing Films for Flexible Electronics and O-PV”
Thin Film Transistors
AIST, Japan
Dr Tatsuo Hasegawa, Deputy Director
“Double-Shot Inkjet Printing for Single-Crystal Semiconductor Films”
ACREO, Sweden
Dr Peter Andersson Ersman, Research Scientist
“Displays and Transistors Printed on Flexible Substrates and Integrated into Versatile Applications”
TU Chemnitz, Germany
“Fully mass printed organic field effect transistors with a transit frequency in the kHz range”
cea, France
“Amorphous and small molecule fully printed organic CMOS technologies for large area circuit electronics”
