Exhibitor List
Current Exhibitors, Sponsors and Partners.
Gold Sponsors
 |
FUJIFILM Dimatix, Inc. |
|
| FUJIFILM Dimatix, Inc. is the world's premier provider of piezoelectric inkjet printheads and systems. FUJIFILM Dimatix's MEMS-based technology lets inkjet printing create products like displays and electronics, RFID antennas, smart tags, DNA arrays, smart packaging and wearable electronics. The DMP-2831 is a low-cost, cartridge-based piezoelectric inkjet printing system that enables direct deposition of functional fluids - including nanoparticle-based metallic and organic materials. Similarly, the DMP-3000 is capable of printing a wide range of functional fluids from both experimental cartridge-based printheads with small volumes and high performance printheads appropriate for industrial and high throughput applications. FUJIFILM Dimatix has more than 25 years experience in advancing the performance of drop-on-demand dispensing devices and applications. Our state-of-the-art technology provides solutions for the organic and printed electronics industries. | Booth number: B01 www.dimatix.com Sector(s), Products and Services |
|
 |
PolyIC GmbH & Co.KG |
|
| PolyIC is a leading developer of polymer electronics technology and moreover a future supplier of printed electronic products and components. The two product lines are called PolyID® and PolyLogo®. The activities are focused on providing innovative low cost electronics for mass markets.PolyIC focuses on its expertise in materials, new adapted chip design methods as well as mature mass production processes (roll-to-roll printing) for the development of this new technology and the goal of large-volume production. The leading application for PolyIC is RFID (radio frequency identification). |
Booth number: B10 www.polyic.com Sector(s), Products and Services |
|
Silver Sponsors
 |
BASF Future Business GmbH |
|
| BASF Future Business GmbH, a 100 percent subsidiary of BASF Aktiengesellschaft, was founded in April 2001. It aims to open up business areas with above-average growth rates that lie outside BASF’s current activities. The company focuses on chemistry-based new materials, technologies and system solutions. BASF Future Business GmbH commissions research from BASF’s R&D units on the one hand, and, on the other hand, cooperates with startup companies, industrial partners, universities and potential customers. Further tools include acquisition of a direct stake, joint ventures, with partner companies or provision of venture capital via the subsidiary BASF Venture Capital GmbH. Competence in organic electronics: Supported by BASF’s research laboratories and a number of partnerships BASF Future Business GmbH runs multiple projects stretching from development of semiconductors and dielectrics to OLEDs, photovoltaic and sensors. |
Booth number: B06 www.basf-fb.de/de.html Sector(s), Products and Services |
|
 |
Coatema Coating Machinery GmbH |
|
| For more than 30 years now Coatema Coating Machinery GmbH has been designing and constructing coating and laminating plants for the most different applications. Different substrates and chemicals can be processed on Coatema plants, either as sheets or from roll to roll. For Printed Electronics Coatema offers optimal coating, printing, laminating and embossing technology combined with different drying and annealing options in nitrogen atmosphere if needed. From small scale to production scale of operation, Coatema is your partner for different coating and printing operations. The company owned Coating Center with 11 different pilot lines and a production plant with working widths from 250 mm up to 2.000 mm can be used for project and process development or toll coating purposes in the field of Flexible Electronics, Prepregs, Batteries, Fuel Cells, Solar, Films, Technical Textiles, etc. |
Booth number: D13 www.coatema.de Sector(s), Products and Services |
|
 |
Plextronics Inc. |
|
| Plextronics, Inc. is an international technology company that specializes in printed solar, lighting and other electronics. Headquartered in Pittsburgh, PA, the company's focus is on organic solar cell and OLED (Organic Light Emitting Diode) lighting, specifically the conductive inks and process technologies that enable those and other similar applications. A privately held company with select partners and strategic corporate and venture investors, some of the country's most prominent venture capital firms in the light, power and circuitry markets have invested in Plextronics. | Booth number: B13 www.plextronics.com Sector(s), Products and Services |
|
Bronze Sponsors
 |
Merck Chemicals Ltd. |
|
| Merck is a global pharmaceutical and chemical enterprise with more than 30,000 employees in around 60 countries. Its success is characterised by innovations from entrepreneurial employees. The Chemicals business sector offers chemicals for sophisticated applications: liquid crystals for displays, effect pigments for industry and cosmetics, analytical reagents and test kits, as well as products and services along the entire process chain of the pharmaceutical and biotech industries. | Booth number: A24 www.merck-chemicals.co.uk Sector(s), Products and Services |
|
 |
SunaTech Inc. |
|
| Spun off from the Chinese Academy of Sciences, SunaTech Inc. supplies high quality chemicals and offers problem-solving solutions to worldwide R&D activities in the areas of organic electronics, life sciences and biotechnology. Since its incorporation in 2007, SunaTech has developed business relationship with various organizations ranging from academia to industry and from organic electronics to medical diagnostics. As a small start-up company, SunaTech has a number of Ph.D. scientists with working experience in the US, Canada, Europe, Japan and China. SunaTech’s overseas distributor is Rubipy Scientific Inc. SunaTech’s business development requires a sustained financial support. If you are interested in investing in SunaTech's future business, particularly in organic electronics and point-of-care diagnostics, please feel free to contact us at info@sunatech.com for investment opportunities. |
Booth number: A19 www.sunatech.com Sector(s), Products and Services |
|
 |
Thin Film Electronics AB |
|
| Thin Film Electronics (“Thinfilm”) is a leading provider of non-volatile memory products based on the use of functional polymer materials since its founding in 1997. These non-volatile and flexible memories are ideally suited for consumer products such as personalized toys and online-enabled game cards. Brand protection, authenticity identification, smart packaging, displays and all-printed RFID are other application areas. Thinfilm delivers unique printed memory products today, and with partners, will deliver integrated printed electronics tomorrow. Thinfilm is headquartered in Oslo, Norway, with R&D facilities in Linkoping, Sweden. Thin Film Electronics ASA is listed on the Oslo Axess market of Oslo Børs in Norway | Booth number: D09 www.thinfilm.se Sector(s), Products and Services |
|
Exhibitors
 |
3D-Micromac AG |
|
| 3D-Micromac AG a leading supplier laser micro machining systems develops and manufactures highly efficient state of the art laser micromachining workstations for industry, research, and science. These systems are used e.g. in facilities for production of photovoltaic systems, processing of semiconductors, medical applications and display technologies (LED/OLED). Processes used with laser micromachining are micro drilling, signing, cutting, 2D and 3D structuring, and marking of various materials and thin films. Extremely precise positioning systems, innovative beam-delivery concepts, as well as numerous process monitoring methods offer highest possible process reliability and maximum speed of machining. The utilization of lasers possessing highest beam quality ensures top machining results regarding surface and edge quality with a minimum of damage to the material and marginal materials loss. |
Booth number: E14 www.3d-micromac.com Sector(s), Products and Services |
|
 |
Acreo AB |
|
| Acreo is a Swedish non-profit research organization owned by the Swedish government and industry. Acreo’s mission is to provide contract R&D and production resources for new innovative products in electronics, optics and communication technology. Our activities range from basic research through development and to the final stage of production. The competence spectrum is broad and based on basic research. Acreo has been working within the field of printed electronics and organic material for the last 10 years. The Printed Electronics group is specialized in low-cost electronics including developments of materials, components and functionalities as well process developments for rational production, in particular with focus towards reel-to-reel production. Acreo have in close cooperation with Linköping University established technology platforms within printed electronics and bioelectronics. | Booth number: B09 www.acreo.se Sector(s), Products and Services |
|
 |
ACTEGA Terra GmbH |
|
| ACTEGA Coatings & Sealants, a division of the ALTANA AG, develops and produces specialty coatings, sealants, printing inks, and adhesives for packaging and the graphic arts industry. These products deliver an attractive appearance to materials such as paper, paper board, plastic and metal. They also provide clearly defined chemical and physical properties to the materials' surface.ACTEGA Coatings & Sealants is world-wide represented with nine enterprises in all important regions. | Booth number: C01 www.actega.com |
|
 |
ALTANA AG |
|
| The ALTANA Group, with headquarters in Wesel/Germany, develops and produces high-quality innovative products in the specialty chemicals business. The ALTANA Group has four divisions: BYK Additives & Instruments, ECKART Effect Pigments, ELANTAS Electrical Insulation, and ACTEGA Coatings & Sealants. ALTANA offers innovative, environmentally compatible solutions with the matching specialty products for coating manufactures, paint and plastic processors, the printing and cosmetic industries, and the electrical and electronic industry. The product range includes additives, special coatings and adhesives, effect pigments, sealants and compounds, impregnating resins & varnishes, and testing and measuring instruments. |
Booth number: C01 www.altana.com Sector(s), Products and Services |
|
 |
Beneq |
|
| Beneq develops atomic layer deposition (ALD) and aerosol-based coating methods for high-end R&D and demanding industrial environments. Our business strategy combines the ability to identify a customer’s need, to understand and develop a solution for it and then, commercialize it in the shape of a piece of equipment. Industries served include: • photovoltaic (TCO thin films, diffusion barrier coatings, anti-reflective coatings and surface passivation) • glass manufacturing and post-processing (on-line TCO, Low-e coatings, surface layer coloration) • printed electronics (diffusion and moisture barrier coatings). Our equipment range includes: • TFS 1200 Thin Film System for ALD, for in-line production routines. Maximum substrate size 1200×1200×10 mm. • TFS 200R Thin Film System for ALD, for R&D of continuous mode and R-2-R ALD. Deposition is performed on flexible substrates. |
Booth number: D05 www.beneq.com Sector(s), Products and Services |
|
 |
Botest Systems GmbH |
|
| Botest Systems, located just outside of Wuerzburg, Germany, is a technology company founded in 2001. The company is active in development, manufacturing and marketing of test and inspection systems for various high-tech industries, especially for the organic electronics industry, and collaborates closely with leading research institutions in Germany and Europe. Its product portfolio includes lifetime and functionality test systems for OLEDs, organic solar cells, and organic sensors. The Botest team consists of engineers and scientists in the fields of electronics, information technology and mechanical engineering as well as applied physical chemistry and OLED development. By close cooperations in the different fields of the application of organic electronics Botest can fulfill any special customer requirements in the area of science and research as well as development and production. | Booth number: A10 www.botest.com Sector(s), Products and Services |
|
 |
CEA/LITEN |
|
| Within the Technological Research Division of the CEA, the CEA Liten (Laboratory of Innovation for New Energy Technologies and nanomaterials) has the role of developing New technologies of Energy.Based mainly in Grenoble, the CEA Liten should be focused on three key areas : photovoltaic energy, hydrogen and fuel cells and nanomaterials. These three topics are addressed to as many the carrying markets: building, transport and mobile electronics.In all these fields the CEA Liten has an active step of response to the stakes on lifestyles by partnerships with the industry but also by the installation of the powerful working tools called technological platforms intended to facilitate the transfer of technologies towards the industry.The CEA Liten is one of the major actors of the INES, National Institut of the Solar energy which has the role the research, the development and the innovation industrial in solar thermics and photovoltaic energy. |
Booth number: D08 www-liten.cea.fr Sector(s), Products and Services |
|
 |
Ceradrop |
|
| CERADROP is a unique organization which offers complete solutions of micro-fabrication of 2D and 3D multi-materials components by inkjet printing.CERADROP have developed an exclusive approach of the inkjet manufacturing process notably based on dedicated CAD software allowing the user to design a component by integration of process parameters and by all the process steps simulation in order to quickly identify the key points of a design. We completely remove the historical graphical approach and provide a full freedom process allowing the user to reach directly and quickly a functional component and understand and manage all the process steps.Thanks to CERADROP’s expertise which is extensive across the technological directions of this process, CERADROP offers its customers an innovative industrial technology (both special equipments and inks) as well as providing a wide spectrum of services. | Booth number: C08 www.ceradrop.fr Sector(s), Products and Services |
|
 |
DFF German Flat Panel Display Forum |
|
| DFF - the German Flat Panel Display Forum - is the industry-led association of European FPD material and component suppliers, equipment manufacturers, display manufacturers, system integrators, end users, and research institutes. DFF strives to strengthen the European FPD industry. We offer our members regular working group meetings, news services, training courses, fair and conference support and our competence brochure. No matter in which part of the added-value chain you are active, no matter in what display technology or application you are interested, DFF has something to offer to you! |
Booth number: E23 www.displayforum.de |
|
 |
DuPont Microcircuit Materials |
|
| DuPont Microcircuit Materials has 40 years of experience in the development, manufacture and sale of specialised ink compositions for a wide variety of electronic applications in the display, photovoltaic, automotive, biomedical, industrial and telecommunications markets. The company holds a lead position in these markets with success based on close customer relationships and a comprehensive worldwide support infrastructure.Utilising core expertise such as materials science, chemistry and fine particle technology, the inks are used on a wide variety of substrates suitable for many new Printed Electronics applications, for example DuPont™ Solamet® Ag inks for thin film photovoltaics. |
Booth number: D20 www.mcm.dupont.com Sector(s), Products and Services |
|
 |
DuPont Teijin Films Ltd. |
|
| DuPont Teijin Films is the world's premier producer of PET and PEN polyester films, specialising in film products and related services for the speciality, industrial, packaging and advanced magnetic media and photo systems, electrical and electronics markets. The company has reported sales of $1.1 billion and employs about 3,000 people with dedicated marketing, technical and manufacturing operations in every region of the world. Brand names include Mylar®, Melinex®, and Teijin® and Tetoron® PET polyester film, and Teonex® PEN polyester film. The business includes existing joint ventures with DuPont-Hongji Films Foshan Co., Ltd., in China. DuPont Teijin Films is a 50:50 joint venture between DuPont and Teijin Limited. | Booth number: D20 www.dupontteijinfilms.com Sector(s), Products and Services |
|
 |
ECKART GmbH |
|
| ECKART, a division of the ALTANA Group, is a leading international manufacturer of metallic pigments for the paints and coatings industry, the graphic arts industry, the plastics, lightweight concrete industries and the cosmetics industry. Our product range today encompasses all kinds of metallic effect pigments and even press-ready metallic printing inks. Pearlescent pigments round off our range. | Booth number: C01 www.eckart.net |
|
 |
ELANTAS Beck GmbH |
|
| ELANTAS Electrical Insulation, a division of the ALTANA Group, develops, produces and sells wire enamels, impregnating resins, sealing compounds and casting resins, which are used among other products for electric motors, transformers, generators, capacitors, printed circuit boards, sensors and electronic modules. ELANTAS Electrical Insulation comprises nine companies in six countries. |
Booth number: C01 www.elantas.com |
|
 |
Enfucell Ltd. |
|
| Enfucell, Ltd is a dynamic, innovative company offering state of the art customer solutions for disposable low voltage (1,5 - 3.0 V) power needs. Enfucell's thin, flexible and environmentally friendly SoftBattery(R) represents the next generation of battery technology, offering a completely new level of performance and thinness. The manufacturing process is based on traditional paper printing and lamination technology, making it cost competitive, using freely available industrial raw materials thus offering the company a key competitive advantage. The SoftBattery(R) can be used in a wide range of new applications such as semi-active RFID, functional printing & packaging, sensor based tags and transdermal drug & cosmetic delivery patches. |
Booth number: E20 www.enfucell.com Sector(s), Products and Services |
|
 |
Essemtec AG |
|
| Essemtec is a worldwide leading manufacturer of Surface Mount Technology (SMT) production equipment. Essemtec specialises in Printed Circuit Board (PCB) production and prototyping equipment for small to mid size volumes using Surface Mount Technology. Essemtec is the only manufacturer to cover the entire production process, from printers and/or dispensers, to pick and lace, to handling and storage system and soldering equipment. Therefore the customer benefits from the knowledge and the ability to select, from a single source, a complete process solution to meet their requirements. Essemtec systems are optimized for maximum flexibility. The user can switch from one product to another in no time and get maximum use of the available production capacity. |
Booth number: A18 www.essemtec.com Sector(s), Products and Services |
|
 |
Evonik Degussa GmbH |
|
| Evonik Industries AG is the creative industrial group from Germany, which operates in three business areas: Chemicals (formerly Degussa), Energy and Real Estate. Evonik is a global leader in specialty chemicals, an expert in power generation from hard coal to renewable energies, and one of the largest private residential real estate companies. The company’s strengths are creativity, specialization, continuous self renewal, and reliability. Evonik combines its experiences in traditional synthesis, formulation and scale-up with thorough understanding of devices and application technology.In the field of printed electronics Evonik is supplying new solution processable n-type inorganic oxidic semiconductors and matched dielectrics. These systems can be processed by a variety of printing technologies and applied in RFID-tags or several display technologies. |
Booth number: B22 www.evonik.de Sector(s), Products and Services |
|
 |
Felix Schoeller Service GmbH & Co. KG |
|
| For over 110 years, Felix Schoeller develops, produces and markets high quality specialty imaging and decor papers. Based on these core competencies, we continually develop new applications and innovative technologies. Based on our knowledge in high-precision coating, which involves using ultramodern technology to apply several thin layers of technologically complex film to webs of material, we have created a new generation of high-quality substrates for the field of printed electronics: p_e:smart. These papers have extremely smooth surfaces, high dimensional stability, regardless of temperature, specific surface properties and consistent quality. We call them next level papers for next level solutions. | Booth number: A17 www.felix-schoeller.com Sector(s), Products and Services |
|
 |
Fluxim AG |
|
| Fluxim develops and provides design simulation software for device optimization and quantification of performance characteristics to the display, lighting, and photovoltaics industries. Our product SETFOS is designed to simulate light harvesting in mixed coherent-incoherent multilayer solar cells with rough interfaces, light emission from thin- film devices such as organic light-emitting diodes (OLEDs), as well as electronic and excitonic processes in organic semiconducting multilayer systems. | Booth number: D03 www.fluxim.com Sector(s), Products and Services |
|
 |
Fraunhofer IAP |
|
| Booth number: E16 www.oled-research.com Sector(s), Products and Services |
||
 |
Fraunhofer Institute for Reliability and Microintegration |
|
| Fraunhofer IZM’s department Polytronic Systems develops components and hetero-integration technologies for „Large Area Electronics“, especially for ‘ubiquitous systems’, integrating e.g. electronics, sensors, batteries and microfluidic systems. Profound knowledge of fabrication of electronics and sensors of organic semiconductors (polymer electronics) contributes also to the ‘Demonstration Center Polytronics’, offering unique possibilities for developing and producing flexible systems by industrial equipment. Low-cost reel to reel processes on flexible substrates, such as plastic films or paper, are established as key fabrication technologies. Further research topics and services cover advanced closed thinning, handling and separation techniques for ultra-thin silicon substrates, MEMS, nanotechnologies (nanocontacts, nanolawn) and surface programming and self organisation for chip assembly. |
Booth number: A14 www.izm.fraunhofer.de Sector(s), Products and Services |
|
 |
GRT GmbH & Co KG |
|
| GRT GmbH & Co. KG is a leading company in the consulting, development and production of all kinds of roto gravure cylinders for packaging and security printing in highest quality. The core competence is the micro structuring of information. Technically an ablation laser with a unique resolution of two micrometers enables also for electrical applications to scale dimensions down to smallest values. The spec range, which can be covered by this technique, is wide spread from smallest gap design to high volume transfer in printing process with a high grade in evenness of layer. For this market GRT is running several R&D projects with partners from institutes and industries as well as cylinder production for mass applications. |
Booth number: B23 www.goerz-gravurtechnik.de Sector(s), Products and Services |
|
 |
H.C. Starck Clevios GmbH |
|
| H.C. Starck Clevios GmbH, Leverkusen is a 100% daughter company of H.C. Starck GmbH, Goslar. HC Starck Clevios delivers full commercial scale conductive thiophene based monomers and polymers (materials and formulations based on PEDOT:PSS), semi-conductive materials and specialty chemicals to the electronics, displays, capacitor, photographic and lighting industries. From our extensive Leverkusen and Mito, Japan laboratories we offer full technical support – from technical advice to the preparation of tailor made formulations. At LOPEC 2010 we will present the latest highly conductive versions of PEDOT:PSS and our most recent developments in HIL technology for displays, lighting and solar cell industries. | Booth number: A08 www.clevios.com Sector(s), Products and Services |
|
 |
Hans Frintrup GmbH |
|
| The Frintrup - Technical Printing Division manufactures high-end stencils for a variety of industries such as: automotive, electronic and solar.Together with our close partner NB Technologies, we offer the entire range of services, starting from the initial development, prototyping and optimizing, and finally to manufacturingthe product on a large scale. Combining these services along with worldwide on-site support, we fulfil all the needs of the technical printing industry.Our newest official available products shown at the LOPE-C 2010 are the sunstence® UNI and the sunstence® ME. These are especially designed for the highest accuracy and alignment for multi-printing approaches of small structures. | Booth number: B05 www.frintrup.de Sector(s), Products and Services |
|
 |
Hessen-Nanotech of the Hessian Ministry of Economics |
|
| Aktionslinie Hessen-Nanotech With around 150 companies providing or using nanotechnology and over 80 research working groups, the German State of Hessen is an excellent location for nanotechnology business. The Aktionslinie Hessen-Nanotech of the Hessen Ministry of Economics, Transport, Urban and Regional Development is the central platform for the nanotechnology in Hessen. It provides support for regional companies and facilities active in nanotechnology and materials-based technologies. |
Booth number: E22 www.hessen-nanotech.de |
|
 |
HNP Mikrosysteme GmbH |
|
| HNP Mikrosysteme is a German-based highly innovative company with 36 employees. The company produces micro annular gear pumps which are miniaturized rotating displacement pumps for dosage of lubricating and non lubricating liquids. These innovative micro pumps are ideally used where fast and highly precise dosage is required. Beside several application possibilities at plant engineering and construction, chemical processing and analytical instrumentation, mzr-pumps are used for demanding metering tasks for solvents including conductive and semi-conductive polymers, handling of organometallic precursors as well as application of polishing suspensions. Four series of micro annular gear pumps guarantee a flow rate from 1 µl/h to 1152 ml/min as well as a dosing precision of less than 1 % C.V. with 1 µl of water and enables high pressure up to 80 bar. | Booth number: A23 www.hnp-mikrosysteme.de Sector(s), Products and Services |
|
 |
Holst Centre |
|
| Holst Centre is an independent open-innovation R&D centre that develops generic technologies for Wireless Autonomous Transducer Solutions and for Systems-in-Foil. A key feature of Holst Centre is its partnership model with industry and academia around shared roadmaps and programs. It is this kind of cross-fertilization that enables Holst Centre to tune its scientific strategy to industrial needs. Holst Centre was set up in 2005 by imec (Flanders, Belgium) and TNO (The Netherlands) with support from the Dutch Ministry of Economic Affairs and the Government of Flanders. It is named after Gilles Holst, a Dutch pioneer in Research and Development and first director of Philips Research. Located on High Tech Campus Eindhoven, Holst Centre benefits from the state-of-the-art on-site facilities. Holst Centre has over 145 employees from around 25 nationalities and a commitment from more than 20 industrial partners. |
Booth number: B14 www.holstcentre.com Sector(s), Products and Services |
|
 |
IDTechEx |
|
| IDTechEx is a knowledge-based consulting company providing research and analysis on printed electronics, RFID, photovoltaics and energy harvesting. IDTechEx has given independent marketing, technical and business advice and services on these subjects. Consulting: Our work includes technology and market benchmarking, analysis of companies, due diligence, in-company masterclasses and global research. Printed Electronics World: IDTechEx hosts and writes the lead industry journal – Printed Electronics World. This free web based journal provides daily analysis of the latest’s news interpreted by experts. Global reach:We are global in our reach, with offices in Cambridge UK, Boston US and Dresden Germany. In the last six months IDTechEx staff have visited more than 11 countries to progress our knowledge of printed electronics and allied sectors. We would be delighted to talk to you to see how we can help you. Please contact Raghu Das call + 44 1223 813703. |
Booth number: E25 www.idtechex.com |
|
 |
InnoPhysics |
|
| InnoPhysics B.V., a Dutch startup company, introduces the Digital on-demand PlasmaPrint hardware solution that enables mask-less patterned surface activation, etching and deposition of functional coatings on thin plastic and glass substrates. The PlasmaPrint solution can be used to improve ink wetting behaviour and/or to create hydrophobic/hydrophilic contrasts for lab-on-chip applications. In combination with inkjet or slot die coating PlasmaPrint can be used to apply patterned thin uniform films for printed electronics applications. PlasmaPrint will be first introduced in the market in June 2010 as an equipment solution for R&D tabletop printing. Rapid prototyping, versioning and changing designs for printed electronics R&D will become faster and easier. InnoPhysics has started the development of low-cost roll-to-roll equipment to meet the future demand for upscaling of the technology towards production. | Booth number: B27 www.innophysics.nl Sector(s), Products and Services |
|
 |
InnovationLab GmbH |
|
| InnovationLab GmbH (iL) is an application-oriented research and transfer platform of business and science in the Rhine-Neckar Metropolitan region. It was jointly founded by the six globally active companies BASF SE, Freudenberg & Co. KG, Heidelberger Druckmaschinen AG, Merck KGaA, Roche Diagnostics GmbH, SAP AG, and the universities of Heidelberg and Mannheim. All partners are involved in one shared enterprise and have the common goal of driving innovation. iL focuses on Organic Electronics. It collaborates with its partners across disciplines along the entire value chain in order to create novel solutions. The company is a crucial part of the strategy of the cluster Forum Organic Electronics which concentrates on joint research, the transfer of ideas into marketable products, and the development and implementation of educational programs. In addition to the founders mentioned above, the cluster consists of a wider set of 26 companies and universities and was awarded as a Cluster of Excellence (Spitzencluster) with € 40 million by the German Ministry of Education and Research. |
Booth number: B08 www.innovationlab.biz Sector(s), Products and Services |
|
 |
IS&T Society for Imaging Science and Technology |
|
| The Society for Imaging Science and Technology is an international non-profit organization whose goal is to keep members aware of the latest scientific and technological developments in the field of imaging through conferences, journals and other publications. | Booth number: A11 www.imaging.org |
|
 |
isiQiri interface technologies GmbH |
|
| Booth number: A30 www.isiqiri.com |
||
 |
IST METZ GmbH |
|
| Functional Coatings for Polyethylen with UV: As a leading international company we offer curing systems and Know-How to cure UV inks, varnishes, silicones and adhesives. We are the specialists for optical coatings on glass, metal and plastics. Our customers, mainly from the graphic arts benefit from our 30 years UV expertise. All components of the UV systems (lamps, reflectors and electronics) are designed and manufactured in-house at the company headquarter in Nuertingen (Germany). | Booth number: B16 www.ist-uv.com Sector(s), Products and Services |
|
 |
ITRI Industrial Technology Research Institute |
|
| Industrial Technology Research Institute (ITRI) is a national-level research organization that serves to strengthen the technological competitiveness of Taiwan. Current focuses of ITRI’s research activities encompass Information and Communications, Electronics and Optoelectronics, Advanced Manufacturing and Systems, Material, Chemical and Nanotechnology, Biomedical Technology, Energy and Environment. As the global market becomes increasingly competitive, ITRI develops itself into more than a scientific research institute; it is an organization that leverages technology for economic improvement to bring about industrial advancements. ITRI’s Flexible Electronics Pilot Laboratory is the first multi-function facility in Taiwan dedicated to the research and pilot production development of flexible electronics while the Display Pilot Laboratory is equipped with TFT array, cell and module assembly process facilities suitable for development of flexible displays. |
Booth number: A26 www.itri.org.tw/eng |
|
 |
KAMMANN Maschinenbau GmbH |
|
| Kammann is one of the world’s largest suppliers of graphic screen equipment. They have provided proven precision based print and converting solutions worldwide for over 50 years, and set the standard for innovation, performance, and superior design. Our solutions include inline web production of: • Disposable Medical Devices • Printed Electronics • Web Solar Printing Kammann utilizes flat screen printing technology along with its own flexo stations. Drying and curing technology is also engineered and manufactured by Kammann.Built in Efficiency. Roll to roll efficiency, servo controlled screen printing, automatic registration adjustment, single pass production and inline finishing all lead to reduced scrap and increased production.The Kammann K61OS has been successfully applied to printed electronics, and has saved pharmaceutical companies significant time and money associated with medical device production.Producers of single use electrodes for ECG tests and neurophysiologic mappings have achieved higher output and met worldwide demand by applying the K61OS unique production capabilities. |
Booth number: B07 www.kammann.de Sector(s), Products and Services |
|
 |
Korea Printed Electronics Association KoPEA |
|
| The Korea Printed Electronics Association(KoPEA) was founded in September 2008 more than 100 company members & personal members in Korea. The purpose of KoPEA is to provide scientists, engineers and researchers with chances to exchange research activities & information and to discuss the future directions in the rapidly growing Printed Electronics. KoPEA will be a leading group of Korea industry & science world. The vision of KoPEA is to build a bridge between science, technology and application industry. KoPEA provides a unique platform for national and international cooperation between companies, research institutes and the academic world involved in the printed electronics value chain. |
Booth number: C21 |
|
 |
M-Service & Geräte Peter Müller e.K. |
|
| M-Service & Geräte ist Lieferant für mobile und stationäre Videomikroskope, Messsoftware, Bildverarbeitungsprogramme sowie ein großes Spektrum von Lupen, Messlupen und Mikroskopen. Sondersysteme oder Einbausysteme für Fertigungsmaschinen runden das Programm ab. Wir produzieren u.a. Sondermesssysteme für die Vermessung von Bohrern und Fräsern (2D). Weitere Spezialitäten sind Systeme für die Vermessung von Bohrerrohlingen mit Kühlkanälen sowie Einbausysteme für Werkzeug und Schleifmaschinen. Telezentrische Zoomsysteme runden das Programm für Sonderaufgaben ab. | Booth number: B05 www.m-service.de Sector(s), Products and Services |
|
 |
Maschinenfabrik Max Kroenert GmbH & Co. KG |
|
| The Kroenert Group is worldwide the most experienced and most successful machine manufacturer with more than 3000 machines installed in the market of tailor-made printing, coating and laminating machines for roll to roll production.For the dynamic growing market of organic and printed electronics, Kroenert offers again machines suited exactly to our customers needs. Not only for your laboratory as well as small scale production but also for production scale equipment. With a guaranteed success in upscaling.Our experts with a long-term knowledge in converting will support you during the whole process of equipment definition, commissioning and are assuring a final production success. With Kroenert, you will achieve and even exceed the quality and accuracy required for wet coatings in all areas of the electronic industry. All roll to roll machine components, including potentially required sub- supplied components are delivered in high precision out of one hand and installed under Turnkey conditions. Worldwide after sales service incl. process expert's know-how is vivid within Kroenert – a lot of satisfied customers give proof. | Booth number: B25 www.kroenert.de Sector(s), Products and Services |
|
 |
Medicon GmbH |
|
| Medicon, a subsidiary of Optima Group (Schwaebisch Hall), develops and manufactures special machinery for lane-processing procedures. Depending on the specific task, the machines incorporate technologies such as laminating, coating, wrapping, printing, spotting, folding, cutting, sealing and welding. The modular machine concept guarantees outstanding flexibility of the lane-processing systems. Medicon places great emphasis on customized solutions for unique product properties and greater added value. By integrating technologies like ultrasound perforation, HF technology and nano-dosing, Medicon designs and implements new manufacturing approaches in co-operation with producers. |
Booth number: C14 www.medicon-ger.com Sector(s), Products and Services |
|
 |
NB Technologies GmbH |
|
| NB Technologies GmbH (NBT) is a know-how and technical service provider for the semiconductor industry, microsystems and photovoltaics. Our expertise, flexibility and problem solving competence allow complete solutions reaching from the first idea up to and beyond the market launch of a product.NBT deals with microsystems for telecommunication applications, through-wafer interconnection, thin polymer foils for stacked chip assembly or medical applications, enhanced etching processes for thin film patterning and equipment optimisation for electroplating. For the photovoltaic market NBT provides an extensive service portfolio related to plating for solar cell efficiency increase.At LOPE-C 2010 NBT presents together with Frintrup – Technical Printing Division the new generation of high-end screens, Sunstence® uni and Sunstence® me, for aligned fine-line multi-printing applicable to silicon solar cell metallisation concepts. | Booth number: B05 www.nb-technologies.eu Sector(s), Products and Services |
|
 |
NCSR - Dublin City University |
|
| The National Centre for Sensor Research is a world renowned, large-scale, multidisciplinary research facility focused on the science and applications of chemical sensors and biosensors. The research programme of the NCSR includes both fundamental and applied projects, ranging from basic studies of molecular interactions to prototype development for industrial partners. NCSR is focused on developing future sensing technologies for economic and societal benefit for application in personal health monitoring and diagnostics, environmental monitoring, (bio) process optimization and nano/bio-medicine. Researchers at the NCSR have developed conducting polymer nanomaterials coupled with printing technologies for the mass-fabrication of chemical sensors and biosensors. |
Booth number: B29 www.dcu.ie/ Sector(s), Products and Services |
|
 |
Neuber GmbH + Co.KG |
|
| Developing new technologies means for us to manufacture new innovative products with an outstanding quality.Neuber´s is a sales and marketing enterprise for bags and backpacks and has a competence in solar projects. The company focuses on technologies and solar solutions and have been the exclusive global outlet for innovative Sun-Bags. Distribution operations consist of an Internet Store, trade fairs and different retailers worldwide. Neuber´s is leading innovator of Solar Energy Bags and has access to markets all over the world. The activities combine the environmental protection and a positive ecological balance in manufacturing.The Solar Energy Bags feature integrated Konarka Power solar panels and therefore have their own decentralised and fully independent power sources. Power is generated under artificial light without any need for sunshine. Devices like mobile phones, iPods and MP3 players can be recharged everywhere. | Booth number: B19 www.energy-sunbags.de Sector(s), Products and Services |
|
 |
Novacentrix |
|
| NovaCentrix® is enabling the development and manufacturing of next generation Printed Electronics products by offering unique product sets for development and manufacturing. - The PulseForge® tools process high-temperature materials on low-temperature substrates, enabling ink materials like silver, copper, and silicon to be dried, sintered, or annealed on plastic films and paper. The PulseForge tools are designed for use in development and high-speed in-line production, reaching line speeds approaching 300 meters per minute. - Metalon® inks are formulated for high performance while holding the standard for low cost. The revolutionary ICI inkset converts from low-cost copper oxide into copper thin-film after printing, when processed with PulseForge tools ,and is $75/kg in volume. Both the ICI and the JS silver inks can also be printed using low-cost commercial office printers, and can be shipped in preloaded cartridges. |
Booth number: E24 www.novacentrix.com Sector(s), Products and Services |
|
 |
NTERA |
|
| NTERA, Inc. is the leading developer of advanced, fully printable electrochromic materials enabling Interactive Intelligence for Smart Cards, Smart Objects, and Smart Packaging. NTERA’s NanoChromics™ Ink Systems enable cost effective manufacturing of printed electronic displays on a variety of flexible substrate materials using industry standard printing techniques and equipment. These ultra-thin, low power, color changing NCD™ displays will uniquely address the market needs for security solutions, brand protection and consumer interaction with Smart Products. NTERA, Inc. is based in suburban Philadelphia, PA USA, with research and development facilities in Dublin, Ireland. NTERA, NanoChromics and NCD are trademarks of NTERA. |
Booth number: B17 www.ntera.com Sector(s), Products and Services |
|
 |
Organic Electronics Association - OE-A |
|
| The OE-A is the key international industry association for organic and printed electronics and represents the whole value chain of this emerging industry. More than 120 companies from Europe, North America, Asia and Australia are working together to promote the establishment of a competitive production infrastructure for organic and printed electronics. The activities of the OE-A include strategic market understanding, roadmap for organic and printed electronics, education, networking opportunities, quality control and measurement, and the exchange of ideas to unite the entire industry. The OE-A is a working group within the German Engineering Federation (VDMA), headquartered in Frankfurt, and has a local office in the US. | Booth number: B24 www.oe-a.org |
|
 |
Pall Corporation |
|
| Pall Corporation is the largest and most diverse filtration, separations and purifications company in the world. We apply a vast technology portfolio to many industries including semiconductor fabrication, ink jet printing and display manufacturing. Printable electronics is evolving from these key industries and Pall can leverage significant filtration expertise for these new applications.Pall offers filtration options for conductive ink dispersion classification, defect reduction in all coating applications, gel removal in UV curable fluids and for many other applications. Pall filtration technology will enable faster production, fewer defects and lower overall costs in all the markets we serve. In addition, Pall also offers the tools to support your filtration and purification needs from the laboratory to full production. Our products and services will allow you to select the correct technology for your need and optimize for maximum performance and economy. We look forward to your filtration challenge! www.pall.com |
Booth number: D21 www.pall.com Sector(s), Products and Services |
|
 |
PARC (Palo Alto Research Center, Inc.) |
|
| About PARC - A global center for commercial innovation for 40 years, PARC is a pioneer in the development and commercialization of thin film transistors, circuits, and sensors. With deep knowledge of printing technology applied in domains such as displays, image sensors, and medical sensors, PARC’s technical expertise and facility support printed dielectrics, nanoparticle metals, organic, oxide, and silicon (amorphous, polycrystalline, printed nanowire) semiconductors. PARC's clients include display manufacturers, consumer electronics firms, IT companies, government agencies, and materials suppliers to the organic electronics market. | Booth number: A16 www.parc.com/lope-c2010 Sector(s), Products and Services |
|
 |
Paru |
|
| PARU has been very successful in Si based solar cell business and invested a lot in developing printed RFID tags. Printed RFID tags means that in a printing process, antenna, rectifier, digital processors and memory, so called transponder, are roll-to-roll (R2R) printed in several layers on a polyester film. R2R gravure-printing makes ultra-low-cost RFID tags possible that can be used for mass applications. Furthermore, the printed RFID tags can integrate displays and sensors so that they can be used as a core of called ubiquitous sensor display network (USDN). PARU currently offers two product lines : All printed RFID tags and RF logo. | Booth number: B15 www.paru.co.kr Sector(s), Products and Services |
|
 |
Polytec GmbH & Xenon Corp. |
|
| Polytec provides light sources, optical measurement instruments and components for a variety of applications: High power Xenon pulsed-light sources for nano ink sintering and UV curing applications, optical thickness measurement systems, UV, VIS, NIR, Raman, fluorescence and hyperspectral spectrometer, machine vision components as cameras (industrial, high speed and NIR), lenses, illumination and software packages. Xenon has over 45 years of experience providing high energy pulsed light lamps and systems to industries as diverse as medical devices, optical storage media, displays and semiconductors. Our engineers have solved low-temperature curing problems for new process technologies, based on the extraordinary range of power and system flexibility of pulsed light. Xenon is introducing a low cost, modular system for R&D work in sintering silver nanoparticle inks on low-temperature substrates. The RC-847 system features a high intensity pulsed lamp that provides a broadband spectrum, from 200 nm to 1000 nm, with 505 J/pulse energy. |
Booth number: C02 www.polytec.de/xenon-uv Sector(s), Products and Services |
|
 |
prelonic technologies GmbH |
|
| prelonic develops and produces printed electronics. Starting with integrated battery/display modules, prelonic aims also areas like active RFID and one-way-diagnostics.Several printed modules are available, from Kwizzcard to double-displaying translator modules. The first approached markets are giveaways, marketing gimmicks, gaming and trading cards.The first products are built out of available elements like batteries, displays, push buttons and conductive traces. Since prelonic will introduce other elements like sensors, speakers, light, antennas etc., the capabilities for new products will be huge. prelonic is ramping up its production facility in Linz, AT. Sheet processes are developed, roll-to-roll is in progress.The outstanding know-how in combining chemistry, electronics and printing enables prelonic to realize printed electronics a very proprietary way: fully printed and fully integrated. |
Booth number: A20 www.prelonic.com Sector(s), Products and Services |
|
Quadriga Project |
||
| Booth number: E27 quadriga-org.eu |
||
 |
Schaefer Technologie GmbH |
|
| Schaefer Technologie supplies cutting-edge technology for various applications in the field of nano- and micro-technology. The product portfolio focuses on surface characterisation equipment such as atomic force microscopes, optical 3D profilers and digital holographic microscopes.Atomic force microscopy allows measuring not only the topography and nano-roughness but also the electrical properties of surfaces and thin films. Additional operation modes provide information on magnetic, thermal or mechanical properties. Plu optical 3D profilers offer a unique combination of confocal microscopy and interferometery in one instrument. The confocal technique is especially suitable for measurement of rough surfaces and surfaces with steep slopes. For very smooth surfaces with roughness in the nm-range or below, interferometry is preferred. An optional spectral reflectometer allows measurement of thin films down to 10 nm with a resolution of 0.1 nm. |
Booth number: B02 Exhibitor Contact www.schaefer-tec.com Sector(s), Products and Services |
|
 |
Soligie Print Electronics |
|
| Soligie is the leading company to utilize high speed, roll-to-roll manufacturing to produce printed electronics with a variety of conductive, resistive and proprietary materials on flexible substrates such as PET, paper and foil. Soligie offers a full range of services from concept design, circuit design, design for manufacturability and final volume production. We combine emergent materials with proprietary manufacturing processes and produce electrical components such as memory, sensors, displays and batteries for integration onto thin, flexible substrates. Soligie currently serves the medical device, smart packaging, RFID and flexible interconnect markets. | Booth number: B18 www.soligie.com Sector(s), Products and Services |
|
 |
SOPRALAB |
|
| SOPRALAB is an optical metrology company with over 25 years experience in the supply of state of the art Spectroscopic Ellipsometers for the measurement and analysis of thin films. The completely modular designs are tailored to respond to domains ranging from R&D to industrial integrated systems. The powerful technique provides information such as Refractive Index, Transmission, Reflectance, Thickness, Haze, Sheet resistance, Pore Size Distributions and much more for the optimization of today’s material development. We manufacture and market the following product lines for Thin Film Characterization: Spectroscopic Ellipsometers (SE): GES5E to support R&D work. Metrology Systems: IRSE (Infrared Spectroscopic Ellipsometer), SE 5 PV – automated/manual integration for sheet to sheet characterization of Photovoltaic and display panels, SE R2R - inline characterization of roll to roll processed deposition. Ellipsometry Porosimetry (EP): Technique dedicated to the characterization of Porous Thin Films. EPA; operates under atmospheric conditions for mesoporous films. EP; operates under vacuum for micro & mesoporous films. |
Booth number: C15 www.sopralab.com Sector(s), Products and Services |
|
 |
Technische Universität Darmstadt |
|
| The Technische Universität Darmstadt is one of the leading universities of technology in Germany and enjoys an excellent reputation worldwide in teaching and scientific research. The university’s emphasis is on technology, engineering, and natural sciences at TU Darmstadt has established a close collaboration amongst her various faculties, with strong emphasis on research across the boundaries between the various disciplines. One of the important and challenging research topics at the TU Darmstadt concerns Printed Electronics. The interdisciplinary cooperation between material science, mathematics, mechanical and electrical engineering involves the build-up of a value chain from material composition and design to the simulation and device production. As a result of the collaboration between various disciplines at TU Darmstadt as well as with industrial partners, the Technische Universität Darmstadt has established itself as a competence center for Printed Electronics. |
Booth number: A21 www.tu-darmstadt.de Sector(s), Products and Services |
|
 |
VARTA Microbattery GmbH |
|
| VARTA Microbattery GmbH is a leading international manufacturer of OEM and retail batteries with more than 100 years of experience. We develop and produce batteries of all electrochemical system types and sizes in Ellwangen, Germany. VARTA Microbattery offers the right battery solution for every needs and electronic product – including hearing aids, watches, gauges, servers, medical devices and components. As a global systems supplier we are capable of offering effective, customer-specific battery solutions. We invest continuously in research and development to ensure our position as an innovation leader. At LOPE-C 2010 VARTA Microbattery presents together with FP Greenbat new technologies for modern applications, for example, printed batteries, ultrathin battery solutions for the future. |
Booth number: E09 www.varta-microbattery.com Sector(s), Products and Services |
|
 |
VTT Technical Research Centre of Finland |
|
| Booth number: C22 www.vtt.fi Sector(s), Products and Services |
||
